深圳市涛源光电有限公司
深紫外UVC LED使用中注意事项
深紫外UVC LED操作注意事项:
处理UV LEDs时请格外小心。切勿触摸UVLEDs的前表面，任何触摸会导致芯片脱落，金线破损，裸露的手污染了油。
避免UV LEDs丢弃和强烈的冲击。
处理用镊子UV LEDs ，任何UV LEDs应该只由它的陶瓷或铝合金机身，而不是由前顶，窗户玻璃和镜头，如果不遵守，可能会导致芯片损坏，金线，玻璃镜片举行。
存储:
该UV LEDs应保持在30℃或以下， 80％ RH或更低（对于非密封型）。 UV LEDs 。该UV LEDs应在3个月内使用。
吸湿材料（硅胶）并密封的容器中，如氮气贮存容器，被推荐为SMT包，以保持水分以最低的UV LEDs
不要堆叠AR4N ，尤其是AR4N -AB和H.堆叠AR4N - AB和H带镜头可能会引起晶状体由于上述UV LED堆积的损害。
静电:
该UV LEDs是ESD （静电放电）敏感，静电和浪涌电压，严重损害UVLEDs 。搬运或操作UV LEDs时的注意事项必须采取防止静电。
UV LED Handling Precautions:
Be extremely careful when handling the UV LEDs. NEVER touch front surface of the UV LEDs, any touch would lead chip dropping off, gold lines breakage and contaminated by oil on bare hand.
Avoid the UV LEDs dropping and strong impact.
Handle the UV LEDs with tweezers, Any UV LEDs should only be held by its ceramics or aluminum body, not by the front top, window glass and lens, Failure to comply might result in damage of chip, gold line, glass and lens.
Storage:
The UV LEDs should be kept at 30oC or less and 80% RH or less (for non-hermetically sealed types). UV LEDs. The UV LEDs should be used within 3 months.
Moisture absorbent material (silica gel) and sealed container, such as nitrogen storage container, are recommended for the SMT packages to keep moisture to a minimum in the UV LEDs
Do not stack AR4N, especially AR4N-A-B and H. Stacking AR4N-A-B and H with lens May cause the damage of lens due to UV LED stacked above.
Static Electricity:
The UV LEDs are ESD (electrostatic discharge) sensitive, static electricity and surge voltages seriously damage the UVLEDs. Precautions must be taken against ESD when handling or operating the UV LEDs.
LED TaoYuan
