TaoYuan Electron (HK) Limited


English  
TAOYUAN ELECTRON (HK) LIMITED
Your cart is empty

UVC LED Over flow 265-275nm

UVC LED Over flow 265-275nm Application:
Suitable for all kinds of water purification, direct drinking water and other equipments.
Dimensions:see attached figure
Specification and Performance:
UVC LED Over flow 265-275nm Dimensions:
Water inlet&outlet: DN10 Standard quick connector
LED Wavelength:265-280nm, Optical Power:100(mW)
Working Voltage: DC24V, Input Current:300mA, Rating Power:10W;
Pressure 1MPa;
UVC LED Over flow 265-275nm Working Temperature:
LED Lifespan: 10000 hours;
Sterilization Rate: 99.9%
Maximum Desgin Flow Rate: 2.5L/min,If the water flow exceeds this value, the sterilization
effect will be reduced;
Maximum Inlet Water Pressure:0.6Mpa,forbidden to exceed this pressure;
Product Net Weight:
Terminal pulling force:should be able to withstand a pulling force above 30N.
Inspection Method:
Test of Germicidal UV Light Optical Power: 80mW@Constant Current 300mA (use UV
integrating sphere test system);
Germicidal UV Light Voltage: 22-26V@Constant Current 300mA (use UV integrating sphere test
system);
Germicidal UV Light Peak Wavelength: 265-280nm (use UV integrating sphere test system);
Current/Voltage of Module: Electric Power of Module:
Lifespan Test: at room temperature input DC24V, LED works 10000 hours,power attenuation
 80%, other performance must not be abnormal;
Sealing Test:Gas inspection tooling, 0.6MP static pressure for 15 seconds without air leakage;
Low and High Temperature Test:Product can work reliably in the temperature range of 0-60
Product can storage reliably in the temperature range of -10 (not frozen) -60 .
UVC LED Over flow 265-275nm Technical Requirements:
1. The module is assembled in place, and the end cover is in good contact with the sterilization barrel;
2. The surface of the outer barrel is smooth,without discoloration,dirt,burr and shrinkage;
3. The color of the connecting wire, the wire sequence and the direction of the terminal conform to the
drawing;
4. The wire sheath is free from pollution and damage;
5. Terminal insertion force 3.0Kgf.
Technical Requirements:
Junction Box Assembly

UVC LED Over flow 265-275nm Sterilization Module
1. The junction box has no obvious bumps,burrs,and shrinkage;
2. The junction box cover and the junction box seat buckle firmly;
3. The silk screen is clear, without defects, the color and information conform to the drawings, and
the silk screen content is visually centered;
4. The wire sheath is free from pollution and damage;
5. Terminal insertion force 3.0Kgf.

Contact Us E-mail: uv@ledwv.com 


Add to Cart:
Min:  2
  • Model: TY-LED-Sterilizer-6
  • 10000 Units in Stock


This product was added to our catalog on Friday 17 December, 2021.

WeChat  Wechat Us  Wechat1 WeChat  Wechat Us  Wechat2